Digital Clamp Meter AP-570C-APP Bluetooth Clamp Multimeter 4000 Counts Auto-Ranging Multimeter

• [Real-time Data Record By Bluetooth APP HOLDPEAK Clamp-meter has a serial data output function.It is connected to the mobile by Bluetooth and real-time data can be recorded, analyzed and processed by the mobile APP. Before using this function, you need to scan the QR code of the manual and install the mobile APP.

• [Multi-Function Clamp Meter]4000 count auto ranging,AC / DC Voltage/Current,Capacitance measurement,Electrical resistance, Frequency measurement, Temperature, Diode and On/Off Test,Frequency, Continuity measurement, Low power display, LCD display, Relative value, Data hold, Backlight, Auto power off. NOTE: Can't measure the low current, need to over 1A.

• [Anti-Fall Silicone Protection]The Flexible protective cover ensures that the clamp meter falls from high altitude without damage.

• [Certification & Over Load Protection] HP-570C-APP Clamp Meter reach the standard of IEC1010 Double Insulation/Pollution Degree 2/Over voltage Category Ⅲ and overload protection. It will show "OL" on the Screen when over range.

      Specification

• Measuring Current Range200A/400A/0-800A/800-1000A

• Measuring Voltage Range 400mV/4V/40V/400V/750V/1000V

• Measuring Resistance Range400/4k/40k/400k/4M/40M

• Measuring Capacitance Range5.12nF/51.2nF/512nF/5.12uF/51.2uF/100uF

• Operating Temperature-20~1000'C

• Dimensions225*97*40mm

• Weight 450g

• Measuring Frequnency Range5.12Hz/51.2Hz/512Hz/5.12kHz/512kHz/5.12MHz

Display 4000

Diode Test YES

Continuity Buzzer YES

Date Hold/Back Light YES

Auto Power Off YES

Relative Value YES

Dual Display YES

Link to phone AppYEBattery Type9V(6F220)*1

Installation Steps:

1. Please install APP first，you can scan the code or search the “intelligent clamp meter” （Android/IOS）

to download the APP and install it.

2. And open the Bluetooth on your mobile phone.

3. Start APP.

4. Turn on the products.

5. You DON'T NEED find poduct from mobile phone Bluetooth set. The APP will auto

connect to our product, push green " start button" on APP for data transmission .

6. If not connect, please check your phone whether connect to your other stuffs in your home,you need to disconnect other stuff first,and make sure that only your phone's Bluetooth is open nearby,because it will auto connect to others phone if their phone's bluetooth is open too.So you need check the bluetooth connection first.

NOTE: You need to open the permissions of the Storage & Location to save the data before you connect to the AP-570C-APP clamp meter through the APP!

ZhuHai JiDa HuaPu Instrument Co.,Ltd